GET UP TO 20% OFF FOR BULK ORDERS - BUY 10 SAVE 15%, BUY 25 SAVE 20%

22mm Moisture Resistant T&G Flooring P5 600mm x 2400mm
  Zoom

KEY FACTS AT A GLANCE

Material  Moisture Resistant Chipboard
Board Thickness  22mm
Length  2.4m
Width  600mm

This high quality chipboard flooring is moisture resistant with a P5 grading. The tongue and groove design offers an easy quick installation and adds further strength. Gluing the edges is recommended to improve joint strength and accommodate a degree of joist variation. Suitable for use with joists up to 400mm apart. This chipboard is manufactured from recycles wood to reduce the need for landfill disposal and conforms to all appropriate production and environmental standards for consistent quality. Complies with EN13986, EN312-P5 and is CE marked.

Average Rating (2 Reviews):  
Write a Review and share your opinions!

Rating:  
Good Price
05 March 2021  | 

Good price for flooring
Slight Damage to edge, replacement was offered though.
approx half hour wait once arrived to collect.
That said, pulled me out of a hole. will not put me off using again.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Loft boarding
02 October 2020  | 

Atlantic timber, as usual, had the right product in stock, they put it right by the car for us to load. The product size must be designed to just fit through the loft access, so all fixed in place now

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Instructions: How to Provide Cutting Instructions for Sheet Material

We can cut this product for you in our in-house workshop. If you would like us to do this please follow these instructions to make sure we have all of the relevant information to enable us to cut it correctly.

We need two dimensions, in millimetres, to enable us to cut your chosen material.

If the product has a grain please list the dimension in the direction of the grain first.
E.g. if you're making a wardrobe door 1800mm x 500mm and you want the grain to run vertically (the 1800mm way) you would write it as above, 1800mm x 500mm.
If you are making a drawer front 150mm x 397mm and you want the grain to run vertically (the 150mm way) you would write it 150mm x 397mm.

In some cases a sheet can be cut in more than one way to achieve the sizes you want. If you have an intended use for your off cut please tell us so we can cut the sheet in the way that yields the size of cut you would like.

For orders with large numbers of cut pieces we use computer software to calculate the most economical way to cut the sheet. We will not accept responsibility if this method doesn't yield what you were hoping for from your sheet once it has been cut.

If you are unsure about any of your cutting please contact us before placing your order.

22mm Moisture Resistant T&G Flooring P5 600mm x 2400mm

  (2 Reviews)
Price:  £21.34
(Inc. 20% VAT)

Availability  

  

Quantity:
+
We Cut the Timber
Sales & Advice Line: 0161 928 1696