18mm Moisture Resistant T&G Flooring P5 600mm x 2400mm

18mm Moisture Resistant T&G Flooring P5 600mm x 2400mm
Zoom  Zoom
Trade Price:  £9.30(Inc. 20% VAT)
+
Add Cutting Instuction 1:    + £2.00
Add Cutting Instuction 2:    + £2.00
Add Cutting Instuction 3:    + £2.00
Add Cutting Instuction 4:    + £2.00

Delivery:  Surcharge of £5.00

Availability:  

Stock availability TBC  

Stock availability TBC


Material:  Moisture Resistant Chipboard
Board Thickness:  18mm
Use:  sub floors, boarding lofts


  • High-quality moisture resistant flooring with a P5 grading
  • Tongue and groove design for quick and easy installation and added strength
  • 18mm thick boards for use with joists spaced up to 400mm apart
  • This chipboard is manufactured from recycled wood so reducing the need for landfill disposal Conforms to all appropriate production and environmental standards for consistent quality
  • Product is CE marked complying with EN13986 governing panels for use in construction
  • Specifically complies with standards: EN 312-P5
  • For use with joists up to 400mm apart
  • High-density structural particleboard
  • Gluing Tongue & Groove edges is recommended to improve joint strength and accommodate a degree of joist variation

 

Due to the fragile nature of this product and the additional packaging required for safe delivery, a £5 delivery surcharge will be added to the standard delivery charge.

Be the first to Write a Review for this item!

Instructions: How to Provide Cutting Instructions for Sheet Material

We can cut this product for you in our in-house workshop. If you would like us to do this please follow these instructions to make sure we have all of the relevant information to enable us to cut it correctly.

We need two dimensions, in millimetres, to enable us to cut your chosen material.

If the product has a grain please list the dimension in the direction of the grain first.
E.g. if you're making a wardrobe door 1800mm x 500mm and you want the grain to run vertically (the 1800mm way) you would write it as above, 1800mm x 500mm.
If you are making a drawer front 150mm x 397mm and you want the grain to run vertically (the 150mm way) you would write it 150mm x 397mm.

In some cases a sheet can be cut in more than one way to achieve the sizes you want. If you have an intended use for your off cut please tell us so we can cut the sheet in the way that yields the size of cut you would like.

For orders with large numbers of cut pieces we use computer software to calculate the most economical way to cut the sheet. We will not accept responsibility if this method doesn't yield what you were hoping for from your sheet once it has been cut.

If you are unsure about any of your cutting please contact us before placing your order.

Customers who bought this item also bought: