OSB 3 2440mm x 1220mm


Length  2400mm
Width  1220mm

Please note these cutting instructions are for straight cuts only. 

Please contact us for any other cutting instructions.

An engineered panel formed by layering strands of wood in specific orientations. It is compressed and bonded together using wax and resin adhesives. There are two main types, OSB 2 for use in dry conditions and OSB 3 for use in humid conditions. Conforms to BS EN 636-2; Structural class CE2+. For exterior use. Typical end uses include floors, walls, roofs and hoardings.

Average Rating (3 Reviews):  
Write a Review and share your opinions!

Good service and most helpful
12 March 2024  | 

Everything went smoothly until my car failed to get into gear, it turned out that the clutch had failed, and I could only engage either a forward or reverse gear by switching off the engine, engaging the gear required and then turning on the engine. During this hiatus the Staff were very understanding and helpful to get me on my way.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Excellent service
19 May 2022  | 

Recently ordered some flooring which needed accurate and awkward cutting, Atlantic couldn’t have been more friendly and helpful. This can do attitude goes all the way to the delivery as well. Great company!!

Was this helpful to you?  Yes  /  No

This review has not been appraised.

OSB Board and Softwood Timber
23 November 2021  | 

I ordered OSB board for shed shelving. Required cutting to size 1220 x 606. All nicely done by Atlantic. Contacted by Atlantic on email to check the cuts. Delivered to my door with the softwood timber for shelf frame. Excellent service. Thank you.

Was this helpful to you?  Yes  /  No

2 of 2 people found this review helpful.

Instructions: How to Provide Cutting Instructions for Sheet Material

We can cut this product for you in our in-house workshop. If you would like us to do this please follow these instructions to make sure we have all of the relevant information to enable us to cut it correctly.

We need two dimensions, in millimetres, to enable us to cut your chosen material.

If the product has a grain please list the dimension in the direction of the grain first.
E.g. if you're making a wardrobe door 1800mm x 500mm and you want the grain to run vertically (the 1800mm way) you would write it as above, 1800mm x 500mm.
If you are making a drawer front 150mm x 397mm and you want the grain to run vertically (the 150mm way) you would write it 150mm x 397mm.

In some cases a sheet can be cut in more than one way to achieve the sizes you want. If you have an intended use for your off cut please tell us so we can cut the sheet in the way that yields the size of cut you would like.

For orders with large numbers of cut pieces we use computer software to calculate the most economical way to cut the sheet. We will not accept responsibility if this method doesn't yield what you were hoping for from your sheet once it has been cut.

If you are unsure about any of your cutting please contact us before placing your order.

OSB 3 2440mm x 1220mm

  (3 Reviews)
Price:  £17.38
(Inc. 20% VAT)
  + £2.00
  + £2.00
  + £2.00
  + £2.00
We Cut the Timber
Sales & Advice Line: 0161 928 1696