Masterflex Flexible Veneer 2500mm x 1220mm x 0.6mm - White Ash


Brand:  Masterflex
Material:  Real Wood Veneer
Size:  2500mm x 1220mm
Reversible:  No
Thickness:  0.6mm
Use:  Decorative Joinery
Grade:  Crown Cut

Please note these cutting instructions are for straight cuts only. 

Please contact us for any other cutting instructions.

White Ash is a pale timber chosen for it's prominent grain and decorative figure. It's used extensively in Scandinavian furniture and is used in everything from furniture manufacture to decorative joinery to construction. In line with this trend our Masterflex Flexible Veneer is highly popular in Ash as it allows the user to create their own ideas and finish them to look like solid Ash.

Veneer is a very thin layer of wood that is sliced or peeled from a log and glued to a coreboard to create flat panels for use in numerous applications.
This process has the benefit of being more cost effective and more environmentally friendly whilst still retaining the look of solid wood.

The Masterflex range of flexible veneer products is designed to enable skilled professionals to produce their own bespoke veneered panels.
Masterflex is a veneer bonded on a paper substrate and made flexible, which can be applied in the toughest of corners and on most surfaces, both flat and curved using a contact glue. Masterflex is ideal for custom made inlaid work and for refurbishment and repair of existing work.

Be the first to Write a Review for this item!

Instructions: How to Provide Cutting Instructions for Sheet Material

We can cut this product for you in our in-house workshop. If you would like us to do this please follow these instructions to make sure we have all of the relevant information to enable us to cut it correctly.

We need two dimensions, in millimetres, to enable us to cut your chosen material.

If the product has a grain please list the dimension in the direction of the grain first.
E.g. if you're making a wardrobe door 1800mm x 500mm and you want the grain to run vertically (the 1800mm way) you would write it as above, 1800mm x 500mm.
If you are making a drawer front 150mm x 397mm and you want the grain to run vertically (the 150mm way) you would write it 150mm x 397mm.

In some cases a sheet can be cut in more than one way to achieve the sizes you want. If you have an intended use for your off cut please tell us so we can cut the sheet in the way that yields the size of cut you would like.

For orders with large numbers of cut pieces we use computer software to calculate the most economical way to cut the sheet. We will not accept responsibility if this method doesn't yield what you were hoping for from your sheet once it has been cut.

If you are unsure about any of your cutting please contact us before placing your order.


Masterflex Flexible Veneer 2500mm x 1220mm x 0.6mm - White Ash

Price:  £83.94
(Inc. 20% VAT)



We Cut the Timber
Sales & Advice Line: 0161 928 1696