Birch Plywood 2440mm x 1220mm (8' x 4') BB/BB Grade

Birch Plywood 2440mm x 1220mm (8' x 4') BB/BB Grade
Zoom  Zoom
Trade Price:  £71.40(Inc. 20% VAT)
+
  
   
   
   
   
  (6 Reviews)

Please note these cutting instructions are for straight cuts only. 

Please contact us for any other cutting instructions.


Material:  Birch Throughout
Size:  2440mm x 1220mm (8' x 4')
Grade:  BB/BB


Grade - BB/BB

The main commercial or utility grade - both faces are Grade BB – which allows patches and other knots/imperfections. Suitable for all general work including CNC Machining or where face grade not overly important –
However good quality BB grade boards may be acceptable for clear finishing and furniture! Available in Long or Cross grain construction.

Produced in Latvia/Russia, Birch Plywood is a high quality multi-ply panel with superior physical and mechanical properties. Known for its consistent strength, fine grain texture and ease of finishing. Conforms to BSEN 636-2. Available in 4mm, 6.5mm, 9mm, 12mm, 18mm and 24mm thicknesses.

Typical end uses include:

  • Construction
  • Joinery
  • Transport
  • Furniture

Due to the fragile nature of this product and the additional packaging required for safe delivery, a £10 delivery surcharge will be added to the standard delivery charge.

Average Rating (6 Reviews):  
Write a Review and share your opinions!

Rating:  
Birch plywood
Tuesday, 16 March 2021  | 

Super product that has made 3 good desks. Website was easy to use. Cutting and collection service was good.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Fantastic Product, Excellent Packaging
Thursday, 11 March 2021  | 

As others have said, packaging on the ply is fantastic.
Ply itself is great (I got 18mm thick), solid material to work with. My workshop is too small to safely work with 8'x4' so used the cutting service to get 4'x4' pieces. Slight tear out on the back of the cuts but they were dead straight and that mattered more. Delivered much quicker than expected too. Always a bonus. Will definitely use again.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Birch Plywood
Tuesday, 2 March 2021  | 

Really good service - product delivered on time with the individual sheets of ply well protected during transport so no "scuffed" edges. Definitely five stars and will use again and recommend.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Birch plywood
Friday, 22 January 2021  | 

Excellent quality plywood, used to make alcove cupboard carcasses. No voids when cut. Originally going to paint the inside but decided to leave it as finish was great

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Excellent
Thursday, 17 December 2020  | 

This Birch plywood is really nice to use and is better than sheets I have purchased from my previous supplier. Good price too!

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Really good quality
Wednesday, 3 June 2020  | 

I bought a 25mm sheet of this and the finish is excellent: I've turned it into a varnished desk, only two small fills on one side and none on the other which is a continuous veneer. The thing I was most impressed about was the packaging: The sheet arrived with plastic corner protectors, a sheet of hardboard on each side, and a load of foam edging taped around the outside: there wasn't a blemish on the street from transport. The driver was very helpful but it is a two-man lift to get it off the truck, which was not a problem. Will definitely buy again. I have not found a cheaper delivered supplier of this and delivery was a lot cheaper than some sites that were almost the same value as the sheet.

Was this helpful to you?  Yes  /  No

5 of 5 people found this review helpful.

Instructions: How to Provide Cutting Instructions for Sheet Material

We can cut this product for you in our in-house workshop. If you would like us to do this please follow these instructions to make sure we have all of the relevant information to enable us to cut it correctly.

We need two dimensions, in millimetres, to enable us to cut your chosen material.

If the product has a grain please list the dimension in the direction of the grain first.
E.g. if you're making a wardrobe door 1800mm x 500mm and you want the grain to run vertically (the 1800mm way) you would write it as above, 1800mm x 500mm.
If you are making a drawer front 150mm x 397mm and you want the grain to run vertically (the 150mm way) you would write it 150mm x 397mm.

In some cases a sheet can be cut in more than one way to achieve the sizes you want. If you have an intended use for your off cut please tell us so we can cut the sheet in the way that yields the size of cut you would like.

For orders with large numbers of cut pieces we use computer software to calculate the most economical way to cut the sheet. We will not accept responsibility if this method doesn't yield what you were hoping for from your sheet once it has been cut.

If you are unsure about any of your cutting please contact us before placing your order.