We Are Open!

Notice 08/03/2021. In line with current government COVID-19 guidelines our shop in Altrincham is open as normal

Thermowood Cladding V1 Side Profile 20mm x 118mm x 2.25m

Thermowood Cladding  V1 Side Profile 20mm x 118mm x 2.25m
Zoom  Zoom
 Thermowood Cladding  V1 Side Profile 20mm x 118mm x 2.25mThermowood Cladding  V1 Side Profile 20mm x 118mm x 2.25m 
Trade Price:  £12.15(Inc. 20% VAT)
+

Availability:  

Stock availability TBC  

  (1 Review)

Finish:  Heat Treated
Size:  118mm x 20mm
Coverage:  108mm


Thermowood is an ideal choice for cladding. As a result of the ThermoWood process the typical characteristics of softwoods are improved to levels often found in tropical hardwoods; i.e. high durability and excellent stability. These properties are consistent throughout the entire cross section.

It is generally used for external joinery and external cladding, due to properties including high durability and excellent stability. Thermowood cladding in particular should deliver 30 years of service. It is particularly durable against being attacked by fungus.

  • Colour – ThermoWood has an attractive golden brown appearance which if left without any surface coating will start to grey and weather in quite a short period of time.
  • Grain – Straight
  • Texture – Fine
  • Reduced Swelling in Humid Conditions – The Thermowood process leads to a significant reduction in equilibrium moisture content and also improves the dimensional stability which means it has dramatically reduced swelling in width when subjected to changes in relative humidity.
  • Resistance to Fungal Attack – Thermowood also has significantly improved levels of durability against fungi attack. With a durability rating of class 3, Thermowood should be capable of satisfying performance requirements for 30 years of service when used for cladding.
  • Resistant to Insect Attack – Our Thermowood has proven resistant to attack from the three most common wood boring insects found in Europe; House Longhorn beetles, the common furniture beetle and the powderpost beetle.
  • Splitting Strength – As a result of the ThermoWood process there is a reduction in the splitting strength properties of Thermowood compared to the original timber.
  • No Leaching – As no substances are added during the Thermowood process, no chemical leaching will occur. Also, as the resin is removed during the process the problem of resin leakage through knots or pitch pockets is also removed.
Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
Wood Quality
Tuesday, 14 July 2020  | 

The wood seemed well packed but when opened there was a little damage to the corners, especially the top and bottom pieces, even though the packing didn't seem damaged. Fortunately I did not need the full length of all the pieces. The wood quality was excellent.

Was this helpful to you?  Yes  /  No

This review has not been appraised.