For hard or softwood. An air dried one part filler for small holes, splits and damaged areas of wood. Ideal for filling surface imperfections and damaged wood grain. Rapid drying. Can also be varnished or painted. Easy to sand and leaves a smooth dense surface. For internal or external use
- Solvent free
- Filler for small holes and splits
- Rapid drying
- Can be varnished and painted
- Easy to sand
- For interior and exterior use
Apply using a putty knife, forcing into the cracks and holes. Leave slightly proud of the surface to allow for possible shrinkage and to enable sanding. Allow to dry for 2 hours under good conditions. Never exceed layers of 3 mm when applying or shorten the drying time. If it is cold or damp it may require longer to dry. If the hole to be filled is deep, it should be filled in layers of 3 mm allowing each to dry before further layers are applied.
2 hours depending on the temperature and humidity. Do not use below 10°C or in high humidity.
Leave to dry for 2-3 hours before applying undercoat or varnish. Deep filled area may require longer