Birch Plywood 2440mm x 1220mm (8' x 4') B/BB Furniture Grade

Birch Plywood 2440mm x 1220mm (8' x 4') B/BB Furniture Grade
Zoom  Zoom
Trade Price:  £112.20(Inc. 20% VAT)
+
  
   
   
   
   
  (1 Review)

Please note these cutting instructions are for straight cuts only. 

Please contact us for any other cutting instructions.


Material:  Birch Throughout
Size:  2440mm x 1220mm (8' x 4')
Grade:  B/BB


Grade - B/BB

Generally, the best grade available for clear finishing. Good clean appearance, only minor, natural features, i.e. small pin knots permitted on the ‘B’ Face. ‘B’ grade is normally only available with ‘BB’ Grade reverse.

Produced in Latvia/Russia, Birch Plywood is a high quality multi-ply panel with superior physical and mechanical properties. Known for its consistent strength, fine grain texture and ease of finishing. Conforms to BSEN 636-2. Available in 4mm, 6.5mm, 9mm, 12mm, 18mm and 24mm thicknesses.

Typical end uses include:

  • Construction
  • Joinery
  • Transport
  • High Quality Furniture

Due to the fragile nature of this product and the additional packaging required for safe delivery, a £10 delivery surcharge will be added to the standard delivery charge.

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
Great product & Service
Wednesday, 24 February 2021  | 

This product is great quality and the service and information about my delivery were excellent.
I was concerned that the distance the delivery had to travel might be a problem or may arrive damaged but it was packed very well and although it arrived later than I was expecting this was no way due to Atlantic timber as their supplier let them down and another issue with the delivery company were the only issues.

Ryan Marsh at Atlantic Timer was excellent and kept me informed by e-mail and text as to what was happening and why, his communication & customer service were second to none.
I would have no reservations in ordering from Atlantic again and intend to do so in the near future, despite the distance of nearly 200 miles to deliver to me
in south wales.

5 out of 5 for customer service, thank you again Ryan.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Instructions: How to Provide Cutting Instructions for Sheet Material

We can cut this product for you in our in-house workshop. If you would like us to do this please follow these instructions to make sure we have all of the relevant information to enable us to cut it correctly.

We need two dimensions, in millimetres, to enable us to cut your chosen material.

If the product has a grain please list the dimension in the direction of the grain first.
E.g. if you're making a wardrobe door 1800mm x 500mm and you want the grain to run vertically (the 1800mm way) you would write it as above, 1800mm x 500mm.
If you are making a drawer front 150mm x 397mm and you want the grain to run vertically (the 150mm way) you would write it 150mm x 397mm.

In some cases a sheet can be cut in more than one way to achieve the sizes you want. If you have an intended use for your off cut please tell us so we can cut the sheet in the way that yields the size of cut you would like.

For orders with large numbers of cut pieces we use computer software to calculate the most economical way to cut the sheet. We will not accept responsibility if this method doesn't yield what you were hoping for from your sheet once it has been cut.

If you are unsure about any of your cutting please contact us before placing your order.